AD DESCRIPTION

Super Maramu 2000 Amel from 2000, one owner, in excellent condition, always maintained.

Internal description:

Entering from the cockpit entrance on the left, U-shaped kitchen with fridge, oven, microwave, washing machine, and dishwasher opposite the navigation area with advanced electronics including GPS, radar, VHF, and a complete navigation system with dual autopilot, the instruments are doubled in the cockpit. Dinette with C-shaped table with double fridge locker, and opposing sofa with pull-out berth, at the bow a small hallway with wardrobes, a double forward cabin with dedicated bathroom, high-quality furniture in excellent condition. At the stern of the navigation area, a king-size watch berth and a stern cabin with a double bed and bathroom. All rooms are separately air-conditioned.

External description:

Ascending from the steps of the stern, a large sunbathing area before the central cockpit where all the current maneuvers and control systems are around the helmsman's seat with three electric winches and others dedicated, and control for the engine and retractable bow thruster. Wide side decks from the cockpit windshield to the bow with lockers and electric windlass. The VP engine with 105 HP for average speeds of 8 knots under engine. It was 1998 when the La Rochelle shipyard, Amel, decided to put into production a reissue of a truly remarkable boat, the Super Maramu, evolving it in size and equipment up to the Super Maramu 2000. A ketch measuring 16 meters long, with a maximum beam of 4 meters and 60 centimeters. It stands out for the quality of the materials used, the high level of finishes, and its undisputed marine qualities. As with every other vessel produced and designed by the Amel/Carteau duo, one gets the impression that every little detail has been carefully studied to meet the owner's desires.

If we were to summarize in a few words the judgment on this 16-meter Amel, we could state that we experienced a fast, exhilarating vessel in terms of performance, perfect in terms of maneuverability. In reality, the Super Maramu 2000 is a true concentrate of technology and patents, all tested and developed directly by the engineering staff of the Amel shipyard. The hull line of the Super Maramu 2000 is decidedly classic, while a more modern approach has been adopted for the hull design, in an attempt to give the boat truly noteworthy speed qualities. The hull is entirely made of hand-laminated fiberglass, while the deck is made of balsa sandwich. What truly distinguishes this vessel is the quality of construction: the entire hull has eleven watertight compartments, created by structural bulkheads. The deck can be defined with a single adjective: accessible. Entirely finished in synthetic teak, the two side decks are so wide that the raised areas of the cabin top are almost imperceptible. This allows for great freedom of movement while sailing. At the bow, the anchor and windlass are perfectly housed and operable through a simple automated mechanism, activated directly from the control panel at the helm. Two very comfortable lockers for storing sheets, fenders, and sails are positioned on either side of the windlass, while corresponding to the cockpit (in a central position), on the left, there is a locker for the self-inflating life raft. In conclusion, the Super Maramu 2000 is a ketch suitable for a comfortable and safe cruise, but at the same time capable of providing respectable performance.

ADDITIONAL ACCESSORIES AND RECENT WORKS

Equipment Sails One sails

Main sail and mizzen 90%

Jib 90% storm jib 100%

Carbonera 90%. main sail and genoa compared

Year 2024)

No. 2 SUB INTERVENTIONS FOR CONTROL/MAINTENANCE OF HULL, THROUGH-HULL FITTINGS, PROPELLER, RUDDER AND

REPLACEMENT OF NO. 2 ANODES

b) CHECK OF 220V ON-BOARD ELECTRICAL SYSTEM

YEAR 2023

a) SUPPLY AND REPLACEMENT OF FAN COIL IN THE FORWARD CABIN; SUPPLY AND REPLACEMENT

OF FAN COIL CONDENSERS IN THE DINETTE; SUPPLY AND REPLACEMENT OF FILTERS FOR FAN COIL GRILL IN THE OWNER'S CABIN AND DINETTE.

b) DISMANTLING AND REMOUNTING OF KITCHEN FRIDGE, CLEANING, FUNCTIONAL CHECK, RECHARGE AND REPLACEMENT OF THERMOSTAT

c) FUNCTIONAL CHECK OF GALLEY FRIDGE, SUPPLY AND REPLACEMENT OF EVAPORATOR AND THERMOSTAT, CARRIED OUT

d) CHECK AND CLEANING OF FORWARD WC

e) SUPPLY AND REPLACEMENT OF COLLECTOR IN THE ENGINE ROOM CONNECTING SYSTEMS

OF AIR CONDITIONING WATER, WC, DESALINATOR AND THROUGH-HULL FITTING FOR ENGINE, PRIOR

DISCONNECTIONS AND RECONNECTIONS

f) SUB INTERVENTION FOR CLEANING PROPELLER AND HULL AND REPLACEMENT OF ANODES (NO. 2 ROUND FLANGES D.110 AND NO. 1 PROPELLER HUB)

g) INTERVENTION FOR INTERNAL CLEANING

h) ASSISTANCE AT MARINARA FOR RESTORATION OF ELECTRICAL COLUMN

YEAR 2022

a) - SUPPLY AND APPLICATION OF NO. 2 COATS OF ANTIFOULING ON HULL AND NO. 3 COATS ON THE FLOATING PART, INCLUDING TREATMENT OF METAL PARTS WITH SUITABLE PRIMER AND ANTIFOULING AND SUPPLY WITH REPLACEMENT OF ANODES AND GREASING OF PROPELLER.

b) REMOVAL OF OLD STERN ADHESIVES, POLISHING OF THE AFFECTED AREA AND APPLICATION OF NEW ADHESIVES.

c) CLEANING OF FILTER. CONSTRUCTION AND INSTALLATION OF STERN GATE AND RELATED HOOKS. LUBRICATION OF WINCHES (NO. 4 LARGE AND NO. 4 SMALL). WASHING OF DECK AND HULL.

CHECK OF SHAFT WITH THE AID OF AERIAL PLATFORM.

d) CHECK OF AIR CONDITIONING, DISMANTLING OF FORWARD SPLIT, RECOVERY OF PARTS AND RELATED

ASSEMBLY FOR THE CREATION OF A SPLIT TO BE MOUNTED AT THE STERN AND RELATED

INSTALLATION. RECHARGE OF NO. 2 FRIDGES CARRIED OUT.

e) MECHANICAL INTERVENTION: ENGINE AND GENERATOR SERVICE WITH REPLACEMENT OF OIL, OIL FILTERS, DIESEL FILTERS, DIESEL PREFILTER, AIR FILTER FOR ENGINE, IMPELLERS AND ZINC FOR GENERATOR

YEAR 2019-2020

a) - SUPPLY AND APPLICATION OF NO. 2 COATS OF ANTIFOULING ON HULL AND NO. 3 COATS ON THE FLOATING PART, INCLUDING TREATMENT OF METAL PARTS WITH SUITABLE PRIMER AND ANTIFOULING; SUPPLY AND REPLACEMENT OF ANODES

b) MECHANICAL INTERVENTION FOR ENGINE AND GENERATOR SERVICE (REPLACEMENT OF OIL AND FILTERS); DISMANTLING, OVERHAULING AND REMOUNTING OF SEA WATER PUMP FOR ENGINE; REPLACEMENT OF SEA WATER PUMP FOR GENERATOR

c) INTERNAL CLEANING OF HULL, INCLUDING CUSHIONS AND UPHOLSTERY; DECK WASHING

d) RECHARGE OF FRIDGE

e) SUPPLY AND INSTALLATION OF NEW PLEXIGLASS

f) REPLACEMENT OF FORWARD WC PUMP

g) SUPPLY AND INSTALLATION OF ADHESIVE SIGN ON STERN

h) CHECK OF INTERIOR LIGHTS AND PARTIAL REPLACEMENT OF BULBS

YEAR 2015

a) A/V + HULL WASHING and REPLACEMENT OF ANODES

b) REPLACEMENT OF ELECTRIC MOTOR FOR BOW THRUSTER

c) SUPPLY AND LOADING OF BATTERIES

d) SUPPLY OF FENDERS, FENDER COVERS AND LIFE BUOY WITH ROPE

YEAR 2014

a) MECHANICAL INTERVENTION FOR OIL EXTRACTION, REPLACEMENT OF OIL FILTER, PRIMARY AND SECONDARY DIESEL, IMPELLER FOR ENGINE AND GENERATOR WATER PUMP, BELT, OIL AND IMPELLER KIT

b) ELECTRICIAN INTERVENTION FOR CHECKING A/C UNITS, REPLACEMENT OF OUT-OF-USE PARTS AND STARTING UP THE SYSTEM

YEAR 2013

a) REPLACEMENT OF MAIN SAIL BASE MOTOR AND WINCH MOTOR

b) SPECIALIZED TECHNICAL INTERVENTION: DISMANTLING OF THE SHAFT HEAD, CHECK, REPAIR AND REMOUNTING; DISMANTLING OF BOOM

c) ELECTRICIAN INTERVENTION: DISMANTLING, OVERHAULING AND REMOUNTING OF AIR CONDITIONING PUMP

d) CHECK OF 220V WATER PUMP, AIR PURGING AND STARTING UP. CHECK OF ELECTRIC WC, REPLACEMENT OF MOTOR AND CONNECTION.

YEAR 2012

a) SUPPLY AND APPLICATION OF NO. 2 COATS OF ANTIFOULING ON HULL, INCLUDING TREATMENT OF METAL PARTS WITH SUITABLE PRIMER AND ANTIFOULING. SUPPLY AND REPLACEMENT OF ANODES. DECK WASHING.

b) ELECTRICIAN INTERVENTION CARRIED OUT AT MARINARA CIRCLE FOR CHECKING PROBLEMS ON THE DESALINATOR, REPLACEMENT OF FLOWMETER AND FUNCTIONAL TESTS. (MATERIAL: NO. 1 GRADUATED FLOWMETER, NO. 1 O-RING KIT).

YEAR 2010

a) MECHANICAL INTERVENTION: DISMANTLING AND REMOUNTING OF TURBINE FOR OVERHAUL, REPLACEMENT OF AIR FILTER; CHECK OF ENGINE AT MARINARA AND REPLACEMENT OF DIESEL PREFILTER

b) REPLACEMENT OF SHOWER MIXER IN OWNER'S BATHROOM.

c) A/V + HULL WASHING AND REPLACEMENT OF ANODES

YEAR 2009

a) MECHANICAL INTERVENTION ON VOLVO PENTA TMD22 ENGINE: SERVICE WITH REPLACEMENT OF OIL FILTER, DIESEL FILTER, PREFILTER, IMPELLER AND ENGINE OIL

b) A/V + HULL WASHING AND REPLACEMENT OF ANODES

Data considered correct but not contractual. This does not constitute a contractual document in any case, the price displayed is to be considered net of agency commissions to be applied on the final closing value.

Reyacht - Jacopo B.

Please contact Reyacht Infinity XWE Srl at +39 375 7989291