Boat not available

This boat has been sold or desactivated.

Oyster 53

Sailing cruiser from the year 2003 - 15,9m length - in Maryland (United States)

Sailing cruiser used

337.935 €
 53

Advertiser's comments

UNDER OFFER FAST, WELL BALANCED, SUPERB IN POOR WEATHER AND SIMPLE TO HANDLE, THE 53 IS DESERVEDLY MORE OF ONE OF OUR MOST SOUGHT AFTER DESIGNS.

Ref:: 7885693

Features of Oyster 53:

Basic data

  • Type: Sailing cruiser

  • Year : 2003

  • Length: 15.9 m

  • Location: Maryland (United States)

  • Name: Spindrift

  • Flag: -

  • Shipyard: Oyster

  • Material: Fibreglass

Dimensions

  • Beam: 4.5 m

  • Draft: -

  • Ballast: -

  • Displacement: 22498 Kg

Capacity

  • Maximum number of passengers: 7

  • Cabins: -

  • Berths: -

  • Heads: -

  • Water capacity: -

More information on the boat

  • Monohull

This Sailing cruiser's equipment

Oyster

The Company deals the details of this boat in good faith but cannot assurance or warrant the accuracy of this information nor warrant the quality of the boat. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This boat is offered subject to prior sale, price change, or withdrawal without notice.

DETAILED SPECIFICATION

1. CONSTRUCTION
HULL NUMBER
Oyster 53/24.
HULL CONSTRUCTION
Laid-up GRP, single skin with structural stringers and floors to Lloyd’s approved design specification.
HULL FINISH
White body with cove line and double boot top lines in basic Oyster blue.
DECK CONSTRUCTION
Moulded in GRP with balsa core.
DECK FINISH
Teak laid decks.
Bulwark finished with a teak cap rail and stainless steel custom fairleads.
KEEL
High performance bulb (HPB) external lead keel.
RUDDER
Fully protected skeg-hung rudder.
STERN DESIGN
‘Sugar scoop’ rear design with bathing floor trimmed with teak slats and
stainless steel steps for access to the rear deck.
EURCD
Built to comply with the requirements for Category A – Ocean.
2. DECK LAYOUT AND EQUIPMENT
ANCHOR
34kg (75lb) CQR mainstay that self-stows in the stemfront fitting.
60m (196’10”) of 12mm calibrated galvanised chain, fastened at its bitter end to a through-bolted pad eye with substantial lanyard.
WINDLASS
Lewmar Ocean 3 vertical capstan type (24V) electric mainstay gustlass.
DECK ACCESS
Midship gateway stanchions and side-gates for boarding.
Gate to pushpit.
Fold down stainless steel bathing/boarding ladder with teak treads.
Passerelle socket tailored in transom rung.
HATCHES
Oyster custom drop-down washboard unit for main companionway.
Lewmar alloy-framed deck hatches.
Gebo alloy-framed opening coachroof/body seaports, including additional seaport from
cockpit to galley.
CANVASWORK
Large acrylic fold down companionway sprayhood in ‘Marine Blue’ with stainless steel grab rail to aft end. The hood incorporates see-through panels in its forward seaportion.
Bimini with storage cover in ‘Marine Blue.’
Pushpit chair padding and backrests.
Pedestal cover.
DECK P LUMBING
Hot and chilly freshwater deck shower in starboard transom safe.
Anchor/deck wash pump from freshwater supply.
COCKPIT
Teak-laid cockpit.
Stainless steel drinks holders and grabrail to pedestal.
COCKPIT TABLE
Solid teak cockpit desk with stainless steel frame and icebox.
STEERING
Whitlock ‘Athena’ direction pedestal with stainless steel wheel.
Steering wheel with brown suede leather cover.
DAVITS
Simpson 300 electric davits.
GENERAL
Stainless steel pulpit and pushpit.
Stainless steel fairleads, alloy mooring and cockpit cleats.
Dorade vents.
Large full-width lazarette safe with pair stainless steel gasoline struts tailored to lid.
Built-in deck safe at aft end of coachroof for storage of deck gear and life raft.
Stern quarter pushpit chairs in teak and stainless steel.
Antennae mast with Inmarsat Mini C and Iridium aerials.
Gas safe for two 6kg bottles.
3. RIG AND SAIL HANDLING
MAST AND RIGGING
Cutter rig.
Hood Stoway in-mast furling with electric navigate.
Bomar electric furler housing remanufactured (2020).
Seldén solid rod kicker.
Harken B503 hand-operated backstay adjuster.
Stainless steel wire rigging.
Running rigging - assistanced regularly and replaced when required (***.***.***).
Standing rigging (replaced 2013).
Mastfront burgee halyard.
MAINSAIL FURLING
Hood Stoway mainsail furling.
HEADSAIL FURLING
Bomar electric quantityail furling.
Harken cutter staysail furling.
WINCHES By Lewmar.
2 x 64 CEST electric, two velocity, self-tailing primary winches.
2 x 48 CST self-tailing secondary winches.
1 x 48 CEST electric, self-tailing mainsheet winch.
2 x 48 CST two velocity, self-tailing mast winches.
2 x 16 CST two velocity, mainsheet traveller control lines.
SPINNAKER GEAR
Single aluminium allo

Information from the shipyard catalogue. This data could vary from the data about the boat on sale published by the advertiser,

Basic Technical Data

  • Shipyard: Oyster

  • Model: Oyster 53

  • Year of manufacture: 2005

  • Type of boat: Sailing cruiser

  • Construction material: Fibreglass

  • Displacement: 21500 Kg

  • Length: 16,4 m

  • Beam: 4,66 m

  • Draft: 2,22 m

Receive alerts about new adverts by email

  • Type: Sailboats
  • Length: more than 15 m
  • Price: more than 300.000 €
  • Year : from 2000 to 2009
  • Location: United States

Your alert has been created correctly.

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and Conditions

Your alert has been created correctly.

Receive alerts about new adverts by email

  • Type: Sailboats
  • Length: more than 15 m
  • Price: more than 300.000 €
  • Year : from 2000 to 2009
  • Location: United States

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and Conditions