Rhea 750

Power boat from the year 2008 - 7,50m length - in Dorset (United Kingdom)

Vessel used

Verified boat

61.926 €
(VAT included )

66.890 €

Price dropped by 4.964 €
1/15

Advertiser's comments

This is a breathtaking example of the the Rhea 750, a craft that offers quality, practicality, fine sea keeping and strong performance. The Rhea 750 is a safe boat too, the walk around decks are deep and provide the feeling of being in, rather than on the boat. The helmsman has the luxury of a side opening door to give instant and easy access to the side decks, when fishing you are able to steer from the cockpit where there is also a throttle/shift control and a trolling valve for fine speed control. The comfortable, heated, wheelhouse features a cooker and sink, the two berth cabin is also equipped with a sea toilet. A Yanmar 240hp shaft drive diesel can provide fast cruising speeds when required; the ability to access the propeller from the cockpit and clear it of debris is another important safety feature that this fine craft offers. The bow thruster makes handling in close quarters incredibly easy. This boat is offered for sale in immaculate condition, she also boasts a huge inventory which is detailed below. If you would like any further information, or wish to arrange to see this lovely craft, please call Peter on ***.***.***or email *****@*****.*** 

Read more...
See less
Contact now
Ref:: 6999125

Features of Rhea 750:

Basic data

  • Type: Power boat

  • Year : 2008

  • Length: 7.50 m

  • Location: Dorset (United Kingdom)

  • Name: Venus

  • Flag: -

  • Shipyard: Rhea

  • Material: Fibreglass

Dimensions

  • Beam: 2.75 m

  • Draft: 0.69 m

  • Ballast: -

  • Displacement: 2500 Kg

Capacity

  • Maximum number of passengers: -

  • Cabins: -

  • Berths: -

  • Heads: -

  • Water capacity: -

Motor

  • Number of engines: 1

  • Power: 240 HP

  • Fuel capacity: 300 L

  • Motor type : Inboard

  • Fuel type : Diesel

  • Make of the motor: Yanmar 4LHA

  • Engine usage (hours): 398

More information on the boat

  • Narrow boat

Contact now

This Power boat's equipment

Construction

CONSTRUCTION: 
GRP Hull, deck and superstructure
Hull epoxied from fresh
Hydraulic direction
Beaching legs
Steel keel band and skeg to protect the vessel when beached asand
Teak capping rails
Teak box and lower fender rails with stainless steel bands
Propeller access hatch for onboard removal of caught weed, lines etc
Hull polished in February 2019
Last antifouled in February 2019
Anodes replaced in February 2019
DIMENSIONS:
Length Overall: 8.4m (27'6") including stainless steel frontsprit
Beam: 2.8m (9'2")
Draft: 0.7m (2'4")
Displacement: 2,500kg

Machinery

Yanmar 4LHA 240hp diesel engine
3.5 litre 4 cylinder motor with turbocharger and intercoolier
Fresh water cooled
Last assistanced March 2019
Serviced annually with assistance history
398 hours at March 2019
Maximum velocity 20 knots approx
Cruising velocity 15 knots approx
Shaft navigate to 4 blade bronze propeller
Trolling valve
Morse single lever throttle/shift
Engine controls repeated in cockpit
Volvo cut tabs with indicators
Sidepotential front thruster
ELECTRICS:
3 x 12v batteries with isolator switches
Charged by 80A engine alternator and 25A automated sand potential charger charger
Mastervolt charger quality meter
240 Shorepotential unit with Marenco stainless steel inlet plug
Galvanic isolator
TANKAGE:
1 x 300 litre (66 gallon) gasoline basin with Racor gasoline filter
1 x Water basin
WATER SYSTEM: 
Manual chilly water unit

Accommodation

Sleeps two in one double dock
Eberspacher D2 diesel fired warm air heating with outlets to the wheelhouse and compartment
Double V dock forward with stowage below
Raske and Meyde sea toilet
Double helm chair with stowage below
Galley with gas cooker and stainless steel sink
Wheel house chair and desk
Numerous lockers and shelves
Sliding wheelhouse side door
Wheel house stern door

Inventory

NAVIGATION AIDS:
Plastimo compass
Furuno FCV1100-L colour fishfinder
Furuno Navnet 2 GPS/Chartplotter/Radar display
Furuno 18" 2.2kw radome
Furuno Navpilot 511 autopilot
Furuno FI-50 mulitfunction display (Log, velocity & depth)
Icom IC-M421 Euro DSC VHF radio
Sea Me active tracking reflector
Search light with remote control
Navigation illumination
Horn
GROUND TACKLE:
Stainless steel Delta mainstay
Quick 700w electric mainstay windlass with controls at the front and helm
Twin front rollers with stainless steel Sampson post
GENERAL EQUIPMENT:
3 x Windscreen wipers
Live fish reservoir in cockpit sole
Cockpit bimini cover
Fenders and warps
Automatic bilge pump
Manual bilge pump
Beaching legs
2 x Sampson posts to aft of cockpit
Stainless steel strips for forward cleats
Fishing boom holders
Clock
Kenwood KDC-421 player radio/CD player

Broker's Comments

This craft has enjoyed only one, obsessive proprietor. I seriously doubt that a more fully provisioned Rhea 750 has ever been manufactured, certainly the factory tailored teak finishing is both beautiful and unique. The Rhea 750 is a vessel manufactured for those who appreciate a modern take on a proper semi displacement leisure fisher combined with good sea keeping, high quality development and practicality.

Owner's Comments

i bought "Venus" fresh and had her very comprehensively provisioned. I chose this particular Yanmar engine as I kfresh it had an excellent reputation in commercial use, also I did not want to go down the route of an engine that relies too much on electronics (ECUs etc) to run. I felt and still feel that a more mechanical engine has far less chance of running into "issues". I have kept the vessel in Poole throughout her life and cruised the seaport, local waters and carried out some mid channel fishing trips.
"Venus" is a fine caft, she has a good dry ride and is ideal for single handed use. I have been meticulous in my care for her, I think her body looks a

 
Ask for more information

Information from the shipyard catalogue. This data could vary from the data about the boat on sale published by the advertiser,

Basic Technical Data

 

Rhea 750

Rhea 750 is the make and model of this power boat of 7,50m of length and 2.75m of beam. The sale price is 61.926€ and you can see it in Dorset (United Kingdom).

Advert updated on the 20/09/2019
385 visits
Saved as a favourite 0 times

Receive alerts about new adverts by email

  • Type: Power boats
  • Length: less than 8 m
  • Price: from 50.000 € to 100.000 €
  • Year : from 2000 to 2009
  • Location: United Kingdom

Your alert has been created correctly.

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and Conditions

Your alert has been created correctly.

Receive alerts about new adverts by email

  • Type: Power boats
  • Length: less than 8 m
  • Price: from 50.000 € to 100.000 €
  • Year : from 2000 to 2009
  • Location: United Kingdom

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and Conditions

Contact the advertiser

Clipper Marine Poole - Dorset (United Kingdom)