Oyster 56

Sailing cruiser from the year 2007 - 17,10m length - in Suffolk (United Kingdom)

Second hand boat

Verified boat

653.535 €
(VAT included )
1/22

Advertiser's comments

Sloop rigged G5 Oyster 56 with the latest deck styling, interior joinery finished in hand crafted teak, offering a timeless and contemporary feel below decks. The Hall spars alloy mast with carbon V boom and harken switch track, fully battened mainsail, provide an exhilarating sailing experience. Eight berths in four cabins, excluding the saloon. Asante has been maintained regardless of cost, fitted out to blue water specification, early viewing recommended.

Contact now
Ref:: 6774314

Features of Oyster 56:

Basic data

  • Type: Sailing cruiser

  • Year : 2007

  • Length: 17.10 m

  • Location: Suffolk (United Kingdom)

  • Name: Asante

  • Flag: -

  • Shipyard: Oyster

  • Material: Fibreglass

Dimensions

  • Beam: 4.89 m

  • Draft: -

  • Ballast: -

  • Displacement: 26500 Kg

Capacity

  • Maximum number of passengers: -

  • Cabins: -

  • Berths: 4

  • Heads: -

  • Water capacity: 950 L

Motor

  • Number of engines: 1

  • Power: 160 HP

  • Fuel capacity: 950 L

  • Motor type : Others

  • Fuel type : Diesel

  • Make of the motor: Yanmar 4LHA-HTP

  • Engine usage (hours): -

More information on the boat

  • Deck saloon

  • Monohull

Contact now

This Sailing cruiser's equipment

Electronics

Dvd player, Compass, Autopilot, Depthsounder, Plotter, Radar, Navigation center, Cockpit speakers, Vhf, Gps, Cd player, Wind speed and direction, Log speedometer, Tv set, Computer

Electricity/ Motor Oyster 56

Inverter, Shore power inlet, Generator

Deck equipment

Steering wheel, Bimini top, Spinnaker pole, Spray hood, Liferaft, Outboard engine brackets, Teak cockpit, Electric winch, Teak sidedecks, Davits, Gangway, Swimming ladder, Tender, Cockpit table

Comfort / Interior

Battery charger, Oven, Air conditioning, Bow thruster, Hot water, Deep freezer, Refrigerator, Fresh water maker, Microwave oven

Sail

Genoa, Fully battened mainsail, Storm jib

Asante Detailed Specification

HULL CONSTRUCTION         
Laid-up GRP, single skin with structural stringers and floors to Lloyd’s approved design specification. Outer body laminate in Vinylester resin. Additional epoxy, 5 coats, March 2013.
 
HULL FINISH                      
White body with cove line and double boot top lines in dark blue.
 
DECK CONSTRUCTION        
Moulded in GRP with balsa core.
 
DECK FINISH                      
Teak laid decks. Bulwark finished with teak capping rail.
Deck Saloon profile with ‘g5’ styling.
 
KEEL                                  
High performance bulb (HPB) external lead keel.
 
RUDDER                             
Fully protected skeg-hung rudder.
 
STERN DESIGN                   
‘Sugar scoop’ rear design with bathing floor trimmed with teak slats and stainless steel steps for access to the rear deck or blueprint rear.
 
EURCD                               
Built to comply with the requirements for Category A – Ocean.
 
CHARTER CODING              
Built to MCA type 1 with all required safety machinery.
 
ANCHOR                             
75lb CQR main mainstay with 100m (328’) chain with coloured chain markers
Delta 20kg kedge mainstay with 100m(328’) of 18mm octoplait warp and 10m(33’) of 12mm chain.
Remote switch in cockpit.
 
WINDLASS                         
Lewmar V4 vertical capstan 24v electric mainstay windlass with foot switch.
 
DECK ACCESS                     
Carbon 3.2m passerelle including halyard, two mast clutches, stainless steel spreader bar, wires and stays. Side teak side access steps.
Increased profundity stainless steel bathing ladder with teak treads.
Oyster custom drop-down washboard unit.
 
HATCHES                            
Lewmar alloy-framed deck hatches.
Gebo alloy-framed seaportbeams in coaming.
Gebo opening bodyseaports.
Opening long Gebo seaport from galley to cockpit.
 
CANVASWORK                 
Marine blue sprayhood with zip opening to central section, and extended version rails. Stainless steel leather-covered grabrail to aft.
Bimini with clear panel and Velcro flap for boom beam and additional clear panel with Velcro flap above wheel for helmsman.
Canvas covers to all winches in Sunbrella and to cockpit blueprint & V boom.
 
DECK PLUMBING          &

 
Ask for more information

Information from the shipyard catalogue. This data could vary from the data about the boat on sale published by the advertiser,

Basic Technical Data

  • Shipyard: Oyster

  • Model: Oyster 56

  • Year of manufacture: 2005

  • Type of boat: Sailing cruiser

  • Construction material: Fibreglass

  • Displacement: 26500 Kg

  • Length: 17,4 m

  • Beam: 4,95 m

  • Draft: 2,44 m

Oyster 56

The shipyard Oyster has offered us this Oyster 56 of 17,10m of length and a for sale price of 653.535€. Boat manufactured in the 2007 and located in Suffolk (United Kingdom).

Advert updated on the 15/10/2019
296 visits
Saved as a favourite 1 times

Receive alerts about new adverts by email

  • Type: Sailboats
  • Length: more than 15 m
  • Price: more than 300.000 €
  • Year : from 2000 to 2009
  • Location: United Kingdom

Your alert has been created correctly.

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and Conditions

Your alert has been created correctly.

Receive alerts about new adverts by email

  • Type: Sailboats
  • Length: more than 15 m
  • Price: more than 300.000 €
  • Year : from 2000 to 2009
  • Location: United Kingdom

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and Conditions

Contact the advertiser

Oyster Brokerage - Suffolk (United Kingdom)