Oyster 575

Sailing cruiser from the year 2012 - 17,7m length - in Maryland (United States)

Used boat

Verified boat

1.612.903 €
1/26

Advertiser's comments

NEW LISTING!  Beautiful shoal draft 575. More info to come! 

Contact now
Ref:: 7843168

Features of Oyster 575:

Basic data

  • Type: Sailing cruiser

  • Year : 2012

  • Length: 17.7 m

  • Location: Maryland (United States)

  • Name: Arbella

  • Flag: -

  • Shipyard: Oyster

  • Material: Fibreglass

Dimensions

  • Beam: 4.95 m

  • Draft: 2.02 m

  • Ballast: -

  • Displacement: 28250 Kg

Capacity

  • Maximum number of passengers: -

  • Cabins: -

  • Berths: -

  • Heads: -

  • Water capacity: -

More information on the boat

  • Monohull

Contact now

This Sailing cruiser's equipment

DETAILED SPECIFICATION

1. CONSTRUCTION
HULL NUMBER
Oyster 575/12.
HULL CONSTRUCTION
A composite development, moulded using a combination of vinylester and polyester resin with the outer topside finish in a white features NPG gelcoat. Laminate material comprises a combination of E-Glass, Kevlar and Carbon Fibre.
The topside laminate incorporates a high-tech, balsa-cored, E-Glass/Carbon sandwich above the waterline, for additional strength, stiffness and insulation.
Below the waterline, the body features a monolithic (single-skin) composite laminate, with an Aramid/Kevlar layer, reinforced with a matrix of stringers and floors. Combined with BS1088 basic marina-ply structural bulkquantity, this produces a robust structure, with excellent strength to weight qualities and proven longevity.
Additional reinforcements are included in the way of the keel recess, the keel longitudinals, mast bulkfront, P-bracket, forestay and body stringers. Limber holes and/or tubes are installed at appropriate points.
Stringers, bulkfront landings and floors are formed over a non-structural, inert, polyurethane foam.
HULL FINISH
White body with cove line and double boot top lines in basic Oyster blue. Hull and topsides trim and polished (2016).
Hull bottom re-antifouled, and all body exterior zinc anodes replaced (2016).
Ultra 20 Series II electronic antifouling unit tailored with two ultrasonic transducers (2016).
DECK CONSTRUCTION
Moulded in GRP with balsa core.
Oyster 575 deck styling sets fresh industry basics, with modern flowing lines providing sleek looks interior and out, whilst maintaining the Oyster trademark and reputation for a beam and airy deck bar.
DECK FINISH
Teak laid decks. Deck improvement work, and non-slip deck areas repainted (2019).
The deck edge incorporates a bulwark, which facilitates relatively flat side decks. The top of this bulwark has a clean GRP finish, giving a modern and stylish ‘rolled’ edge, enhancing the yacht’s visual appearance with a graceful sheer line.
KEEL
Shoal keel.
RUDDER
Fully protected skeg-hung rudder (assistanced 2016).
STERN DESIGN
‘Sugar scoop’ transom design incorporating a floor instep, which is efeaturesly useful for bathing and boarding and is trimmed with laid teak. Two stainless steel steps with teak tread inserts are fixed on transom for access to the rear deck.
Fold-down stainless steel bathing/boarding ladder with oval rungs, tailored with a lanyard and retaining pin for retrieval/storage.
EURCD
Built to comply with the requirements for Category A – Ocean.
2. DECK LAYOUT AND EQUIPMENT
ANCHOR
Stainless steel Wasi mainstay with 100m of stainless steel chain, and swivel. Modification to stemfront to accommodate the Wasi mainstay.
Lightweight folding alloy Fortress FX55 kedge mainstay with 100m of 18mm Octoplait nylon warp and 10m of 10mm chain.
5 x 20m, plus 2 x 15m mooring warps.
Recessed safe within the foredeck for mainstay chain storage, tailored with hinged lids and a stainless steel, clamp-type locking device.
Partitioned mainstay safe with kedge mainstay storage.
WINDLASS
Lewmar V4 vertical capstan type (24V) electric mainstay gustlass, two-way and operated by adjacent stainless steel foot switches. Windlass assistanced (2016).
Remote gustlass control switch in cockpit.
DECK ACCESS
Pair of gateway stanchions and side gates for boarding.
Stainless steel threshold plates at side gates and rear gate, with vessel name engraved on each plate.
Side boarding ladder to both side gates with leather protection.
Gate to pushpit.
Stainless steel bathing ladder with teak treads.
3.2m Multiplex carbon passerelle, including brace lines and bag (15kg). Passerelle halyard 12mm braid with sheave and exit in mast and XCS clutch.
Passerelle socket in top transom rung.
HATCHES/WINDOWS
Oyster custom drop-down, tinted acrylic, vertical sliding washboard unit to companionway. Mosquito screen to companionway hatch (2016).
Lewmar alloy-fr

 
Ask for more information

Information from the shipyard catalogue. This data could vary from the data about the boat on sale published by the advertiser,

Basic Technical Data

  • Shipyard: Oyster

  • Model: Oyster 575

  • Year of manufacture: 2009

  • Type of boat: Sailing cruiser

  • Construction material: Fibreglass

  • Displacement: 28000 Kg

  • Length: 17,9 m

  • Beam: 5 m

  • Draft: 2,70 m

Oyster 575

You can buy this Oyster 575, sailing cruiser of the 2012 for 1.612.903€. This boat of 17,7m of length and 4.95m of beam can be found in Maryland (United States).

Advert updated on the 18/09/2021
147 visits
Saved as a favourite 0 times

Receive alerts about new adverts by email

  • Type: Sailboats
  • Length: more than 15 m
  • Price: more than 300.000 €
  • Year : from 2010 to 2022
  • Location: United States

Your alert has been created correctly.

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and Conditions

Your alert has been created correctly.

Receive alerts about new adverts by email

  • Type: Sailboats
  • Length: more than 15 m
  • Price: more than 300.000 €
  • Year : from 2010 to 2022
  • Location: United States

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and Conditions

Contact the advertiser

Oyster Brokerage - Suffolk (United Kingdom)