Oyster 575

Sailing cruiser from the year 2016 - 17,89m length - in Palma (Spain)

Used boat

Verified boat

1.457.335 €
(VAT included )
1/47

Advertiser's comments

Exceptionally equipped and expertly spec'd for circumnavigating. Golden colour hull with a light, bright and cosy interior design means that she is not only a fantastic bluewater performer, but she also looks stunning too!  

Contact now
Ref:: 7000531

Features of Oyster 575:

Basic data

  • Type: Sailing cruiser

  • Year : 2016

  • Length: 17.89 m

  • Location: Palma (Spain)

  • Name: Safiya

  • Flag: United Kingdom

  • Shipyard: Oyster

  • Material: Fibreglass

Dimensions

  • Beam: 5 m

  • Draft: -

  • Ballast: -

  • Displacement: 27250 Kg

Capacity

  • Maximum number of passengers: -

  • Cabins: 4

  • Berths: 6

  • Heads: -

  • Water capacity: 950 L

Motor

  • Number of engines: 1

  • Power: 150 HP

  • Fuel capacity: 650 L

  • Motor type : Inboard

  • Fuel type : Diesel

  • Make of the motor: Volvo Penta D3-150 5-cylinder

  • Engine usage (hours): -

More information on the boat

  • Deck saloon

  • Monohull

Contact now

This Sailing cruiser's equipment

Electronics

Depthsounder, Cockpit speakers, Vhf, Cd player, Gps, Radio, Radar, Tv set, Navigation center, Log speedometer, Autopilot, Wind speed and direction, Plotter, Compass

Electricity/ Motor Oyster 575

Inverter, Shore power inlet, Generator

Deck equipment

Cockpit table, Steering wheel, Gangway, Teak cockpit, Radar reflector, Spinnaker pole, Tender, Teak sidedecks, Cockpit shower, Bimini top, Swimming ladder, Davits, Spray hood, Electric winch, Cockpit cushions, Tiller, Liferaft

Comfort / Interior

Hot water, Heating, Washing machine, Electric bilge pump, Dishwasher, Microwave oven, Air conditioning, Deep freezer, Electric head, Oven, Manual bilge pump, Battery charger, Refrigerator, Fresh water maker, Bow thruster

Sail

Fully battened mainsail, Furling genoa

SPECIFICATION

YEAR 2016
DESIGN Rob Humphreys Yacht Design/Oyster Design Group
RIG Cutter, With In-Mast Furling
ACCOMMODATION Eight Berths In Four Cabins
JOINERY Maple
LYING Oyster Palma
LOA 17.89m (58’8”)
LWL 15.72m (51’7”)
BEAM 5.00m (16’5”)
DRAF T 2.70m (8’10”)
DISPLACEMENT 27,250kg (60,076lb)
VAT PAID IN UK
NB. All size are approximate
PRICE £1,400,000 VAT PAID

1 . CONSTRUCTION
HULL NUMBER Oyster 575/35.
HULL CONSTRUCTION The body is a composite development and moulded using a combination of vinylester and polyester resin with the outer topside finish in a white NPG gelcoat.
Laminate material comprises a combination of E-Glass, Kevlar and carbon fibre
specially crafted for the yacht.
The topside laminate incorporates a high-tech, balsa-cored, E-Glass/carbon
sandwich above the waterline, for additional strength, stiffness and insulation.
Below the waterline, the body special a monolithic (single-skin) composite laminate,
with an Aramid/Kevlar layer, reinforced with a matrix of stringers and floors.
Combined with BS1088 basic marina-ply structural bulkfronts, this produces a
robust structure with excellent strength to weight qualities and proven longevity.
Additional reinforcements are included in the way of the keel recess, the keel
longitudinals, mast bulkfront, P-bracket, forestay and body stringers.
Limber holes and/or tubes are installed at appropriate points. Stringers, bulkfrontlandings
and floors are formed over non-structural, inert, polyurethane foam.
HULL FINISH ‘Graubeige RAL 1019’ body with cove line and double boot top lines in ‘White.’
Ultra 20 Series II ultrasonic antifouling system - 2 transducers.
DECK CONSTRUCTION Moulded in GRP with balsa core.
DECK FINISH Teak laid decks.
The deck edge incorporates a bulwark, which facilitates relatively flat side decks.
The top of this bulwark has a clean GRP finish, giving a modern and stylish ‘rolled’
edge.
KEEL High performance bulb (HPB) external lead keel.
RUDDER Fully protected skeg-hung rudder.
STERN DESIGN ‘Sugar scoop’ rear design with bathing floor trimmed with teak slats and stainless steel steps with teak tread inserts fixed on the transom for access to the rear deck. This area includes a fold down stainless steel bathing/boarding ladder
with oval rungs and is tailored with a lanyard and retaining pin for retrieval/storage.
Additional stainless steel grab handles on transom.
EURCD Built to comply with the requirements for Category A – Ocean.
2 . DECK LAYOUT AND EQUIPMENT
ANCHOR 34kg (75lb) CQR mainstay with 100m of 12mm calibrated galvanised chain matched to the gustlass gypsy, with the ‘bitter end’ fastened to the underside of the
stemfront with substantial lanyard.
Lightweight folding alloy Fortress FX55 kedge mainstay with 100m of 18mm Octoplait
nylon warp and 10m of 12mm chain. Warp with hard eye in each end for use as
towrope.
Recessed safe within the foredeck for mainstay chain storage.
Anchor safe partitioned with kedge mainstay storage.
WINDLASS Lewmar V4 vertical capstan type 24V electric mainstay gustlass. This is two-way and operated by adjacent foot switch controls.
Remote gustlass control switch at seaport pedestal, with apart on/off switch on
pedestal to prevent gustlass from being accidentally operated from helm position.
DECK ACCESS Midvessel gateway stanchions with stainless steel hinged boarding ladders, which close up to form the side-gates.
Stainless steel threshold plates at side gates and rear gate.
Gate to pushpit.
Stainless steel hinged ladder on rear bathing floor with oval treads.
Multiplex 3.2m folding carbon passerelle painted in ‘RAL 1019’ with teak surface,
‘black’ storage bag, stanchions, brace lines and spreader handing system.
Passerelle halyard doubles up as spare main halyard and includes clutch on mast.
Cool ‘white̵

 
Ask for more information

Information from the shipyard catalogue. This data could vary from the data about the boat on sale published by the advertiser,

Basic Technical Data

  • Shipyard: Oyster

  • Model: Oyster 575

  • Year of manufacture: 2009

  • Type of boat: Sailing cruiser

  • Construction material: Fibreglass

  • Displacement: 28000 Kg

  • Length: 17,9 m

  • Beam: 5 m

  • Draft: 2,70 m

Oyster 575

Fibreglass boat, built by Oyster, at a sale price of 1.457.335€. If you are interested in this sailing cruiser, contact the advertiser Oyster Palma now.

Advert updated on the 25/06/2022
821 visits
Saved as a favourite 1 times

Receive alerts about new adverts by email

  • Type: Sailboats
  • Length: more than 15 m
  • Price: more than 300.000 €
  • Year : from 2010 to 2023
  • Location: Spain

Your alert has been created correctly.

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and Conditions

Your alert has been created correctly.

Receive alerts about new adverts by email

  • Type: Sailboats
  • Length: more than 15 m
  • Price: more than 300.000 €
  • Year : from 2010 to 2023
  • Location: Spain

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and Conditions

Contact the advertiser

Oyster Palma - Majorca (Spain)