Treeve DS24

Fishing boat from the year 2020 - 7,35m length - in Dorset (United Kingdom)

New boat

Verified boat

Price upon request

1/6

Advertiser's comments

The DS24 is the Flagship in the range of custom fishing boats produced by this renowned Cornish Boat Builder, her hull design is the culmination of over 40 years of experience building reliable, seaworthy craft for the commercial fishing industry.  Combining these rugged design characteristics with the finest craftsmanship and carpentry as well as being constructed to Sea Fish Authority standard, these versatile boats are equally at home earning their keep commercially as they are as weekend dayboats, club launches or motor cruisers.  The custom fit out options allow each individual boat to be specified to suit her intended occupation tailored to her owner's requirements.  From the robust commercial standard fit out to the Penberth Model sporting classic joinery throughout, these boats are all built with ultimate seaworthiness and longevity in mind. The Treeve DS24 has been designed to satisfy a variety of working requirements. It can be operate from shallow water and tidal harbours where it is a necessity to berth at all states of the tide. The vessel has been constructed to give maximum ease of handling and can easily be worked by a single crew member. This has proved to be a major economic feature of the DS24 where the expense of additional crew will limit the cost effectiveness of a small fishing operation. However, the DS24 is equally happy with multiple crew as proved while winter mackerel fishing in the English Channel and off Lands End. A vessel working in such conditions must have an excellent standard of sea-worthiness and the DS24 does not disappoint. With its very heavy lay-up and construction this boat has a well proven capability, The DS24 is available as an open boat or three standard cabin options are available, full forward, traditional Cornish, forward offset or aft pillbox style. The Treeve DS24 is fitted with our standard heavy duty keel irons made from 3/8" plate and 1/4" lugs. Timber keels for beach launching may be added. There is ample room forward of the inboard diesel engine to fit an hydraulic pump and equipment. The deck may be self draining or loose board depending of preference. The steering may be either underhung steel semi-balanced or traditional transom hung timber rudders.

Read more...
See less
Contact now
Ref:: 6904932

Features of Treeve DS24:

Basic data

  • Type: Fishing boat

  • Year : 2020

  • Length: 7.35 m

  • Location: Dorset (United Kingdom)

  • Name: -

  • Flag: -

  • Shipyard: Treeve

  • Material: Fibreglass

Dimensions

  • Beam: 2.64 m

  • Draft: 0.75 m

  • Ballast: -

  • Displacement: -

Capacity

  • Maximum number of passengers: -

  • Cabins: -

  • Berths: 2

  • Heads: -

  • Water capacity: -

Contact now

This Fishing boat's equipment

DS24 SPECIFICATIONS

DIMENSIONS Overall range: 7.5m (24'6")
Waterline range: 6.73m (22'3")
Beam: 2.65m (8'9")
Draught: 0.75m (2'6")
Underhung galvanised stew with bolted flange for prop removal. Bronze stuffing box, kicking rings and emergency tiller.
WHEELHOUSE Rigid GRP with 10mm toughened glass windows
EXHAUST Water injected unit with diesel exhaust hose
FUEL CAPACITY 114ltr (25 gallons) minimum
BILGE PUMP Driven by main engine. 25mm (1") clutch operated Jabasco bilge pump with pipes and vessel side discharge
BALLAST Metal punchings encapsulated in resin
STARTING 12volt electrical unit with alternator and lead/acid charger
GEARBOX Hurth, PRM or Borg Warner water power 2:1 reduction gear
STERNGEAR Bronze 38mm (1 1/2") dia shaft with stainless steel intermediate shaft (in fore wheelhouse arrangement). Bronze Propeller and rear tube. Cutlass or grease lubricated white metal bearings.
RECOMMENDED ENGINE 30 - 40hp
OPTIONAL EQUIPMENT Navigation illumination
Compass/GPS
Diaphragm hand bilge pump
Fore and aft galvanised fairleads, cleats, bitts etc.
25lb mainstay, chain and mooring line
Boathook and scrubber
Mizzen mast, mast, sail, rigging and blocks (gaff type)
Safety gear: lifejackets, red star signals, sound signals, fire extinguishers
CONSTRUCTION Hull lay-up
13oz laminate made up as follows:-
1 gel coat
1 x 1oz CSM and 6 x 2oz CSM
300mm (12") either side of keel reinforced to 23oz/sq ft by adding5x2oz CSM
Area within 380mm (15") of sheer line reinforced to 19oz.sq ft by adding 3x2oz CSM
Sheerline reinforced: Lay-up 2 x 2oz CSM
Keel joint reinforced 1 x 1oz CSM and 5 x 2oz CSM
Transverse frames 75x50mm (3x2") polyurethane expanded foam encapsulated by 3 layers x 2oz CSM, staggered and carried onto body by a further 150mm (6") spaced at 460mm (18") intervals from transom
KEEL Galvanised 100 x 12mm (4x1/2") steel strap with ugs to be extended to rise at sterm. Skeg iron 12mm (1/2")
STEM Shaped galvanised stemband and steel cap to deck
CATHODIC PROTECTION Zinc
RUBBER 75x50mm (3x2") Iroko bolted to body and tailored with 28mm (1 1/2") galvanised convex pub
GUNWALES 100x32mm (4x1 1/4") hardwood with 25mm (1")  Iroko capping and protected from working beer by a 20mm (3/4") galvanised convex strip
BILGE KEELS Approved hardwoods / Iroko 100x50mm x 1524mm long (4x2" x 5' long)
ENGINE BEARERS 75mm (3") x 1 1/2 x Engine range, encapsulated in GRP. Galvanised steel top plates
ENGINE BOX Weathernight GRP with integral soundproofing
DECKS 20mm (3/4") Marine ply finished with non-slip 6oz GRP. Approved hardwood 100x50mm (4x2") illumination with 100x64mm (4x2 1/2") main illumination all illumination sheathed in 6oz GRP
BULKHEADS 20mm 3/4" Marine ply bonded to body
RUDDER - TIMBER OPTION 38mm (1 1/3") Iroo with 32mm (1 1/4") cheek pieces and suitably braced blade. All rudder fittings in galvanised steel.
 
FOR MORE INFORMATION, PLEASE CONTACT US

The Company deals the details of this boat in good faith but cannot assurance or warrant the accuracy of this information nor warrant the quality of the boat. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This boat is offered subject to prior sale, price change, or withdrawal without notice.

 
Ask for more information

Information from the shipyard catalogue. This data could vary from the data about the boat on sale published by the advertiser,

Basic Technical Data

 

Treeve DS24

You can buy this Treeve DS24 of 2020 located in Dorset (United Kingdom) for a negotiable price. It is of a fishing boat with dimensions of 7,35m of length and 2.64 of beam.

Advert updated on the 16/09/2020
6 visits
Saved as a favourite 0 times

Receive alerts about new adverts by email

  • Type: Power boats
  • Length: less than 8 m
  • Year : from 2010 to 2021
  • Location: United Kingdom

Your alert has been created correctly.

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and Conditions

Your alert has been created correctly.

Receive alerts about new adverts by email

  • Type: Power boats
  • Length: less than 8 m
  • Year : from 2010 to 2021
  • Location: United Kingdom

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and Conditions

Contact the advertiser

Imperial Dorset - Devon (United Kingdom)