RIB Carson Interceptor 850

Power boat from the year 2019 - 9m length - in Crinan (United Kingdom)

New boat

Verified boat

137.234 €

(VAT included )

Verified boat

1/19

Advertiser's comments

Super-rugged and capable all-weathers cabin RIB with stepped hull and semi-wave piercing hull design. Powered by fuel-efficient twin Suzuki DF-200 lean burn outboard engines to offer speeds of up to 40 knots. FURTHER BROKER’S COMMENTS: The Carson Interceptor range of RIBs draws on the 4 decades of experience Barry Carson has amassed, designing and manufacturing advanced, heavy-duty RIB’s primarily for commercial use. With their plumb, semi-wave piercing bows and multi ‘delta’ stepped hull the Interceptor range is striking in its appearance. The ‘delta steps’ are U-shaped steps, pointing aft which recedes in form as they get to the keel line; leaving a straight, unbroken keel line; unlike other stepped hull designs. With the bow piercing through waves rather than bouncing over waves as other RIB hull forms do the boats are capable of comfortable cruising at significantly greater cruising speeds. A bespoke, custom built, example of the Carson Interceptor 850, THE DASH was designed with the specific function of providing her owners with a highly capable and comfortable RIB from which they could explore the remoter areas of Scotland’s coastline while being self-sufficient for several days. Her aft cockpit is deep and well-protected, offer a unique drop-down boarding platform on the port side. Below decks she boasts a double berth of more than 6’5” in length along with a full galley and seating area. This Carson Interceptor 850 has and extensive inventory including highlights such as:

Copperbot antifouling
2x Suzuki DF200AP, 200hp outboards
Lenco trim tabs
Hydraulic steering
Dual fuel tanks
Simard NSS EVO 3 12” MFD
Simrad 2kw radar scanner
Simarad RS35 DSC VHF
Wallas Nordic 85Dt, diesel fired hob with air heater lid
Lofrans X1 electric windlass
Rocna 9kg anchor with chain/warp rode
Tender

Lying afloat and in commission the Carson Interceptor 850 THE DASH is a unique opportunity to acquire an immensely capable offshore cruising RIB at fraction of todays build cost. She is available for viewing strictly by prior appointment. OWNERS COMMENTS: Having sailed the west coast for many years, we decided it was time to get from A to B more quickly and not have to fuss quite as much over rain, wind and tide. We wanted to spend more time in our favourite remote places. Taking in the splendid scenery in quieter shallow anchorages, warm and dry, in a cosy cabin with good food and wine. We found a local boat builder in Moray and The Dash was born. It has our essentials. Warm cabin. Good size galley with a great stove. Large comfy bed. Excellent storage space. Plenty of space to sit out. Practical and utilitarian. A great solid boat, made in Scotland, built for us AND the west coast; life changes however and we no longer have the time to use the boat to her potential.

Features of RIB Carson Interceptor 850:

Basic data

Type: Power boat
Year : 2019
Length: 9 m
Location: Crinan (United Kingdom)
Name: -
Flag: -
Shipyard: RIB
Material: Fibreglass

Dimensions

Beam: 0.6 m
Draft: -
Ballast: -
Displacement: 2700 Kg

Capacity

Maximum number of passengers: -
Cabins: 1
Berths: 1
Heads: -
Water capacity: 100 L

Motor

Number of engines: 2
Total power: 400 HP
Fuel capacity: 250 L

Engine 1

Motor type : Outboard 4 Stroke
Power: 200 HP
Fuel type : Unleaded Fuel
Make of the motor: Suzuki DF-200
Engine usage (hours): 190

Engine 2

Motor type : Outboard 4 Stroke
Power: 200 HP
Fuel type : Unleaded Fuel
Make of the motor: Suzuki DF-200
Engine usage (hours): 190

Contact now

This Power boat's equipment

Electronics

Navigation center, Compass, Gps, Depthsounder, Vhf, Radar, Plotter

Electricity/ Motor RIB Carson Interceptor 850

Shore power inlet

Deck equipment

Cockpit cover, Tender, Cockpit table

Comfort / Interior

Electric bilge pump, Manual bilge pump, Heating

Specifications

CONSTRUCTION

Hull Construction:
GRP moulded single piece body Monolithic polyester laminate, hand consolidated Internal structure members and bulkheads of marina plywood sheathed in GRP laminate Grey gelcoat finish externally Copper coat applied below the waterline from fresh
Deck & Superstructure Construction:
Single piece GRP moulded superstructure forming forward bulkhead of cockpit GRP moulded self-draining cockpit Outboard well and transom GRP moulded Alloy framed wheel house roof with bonded in toughened glass screen forward and polycarbonate side screens Grey gelcoat finish externally. Non-slip painted panels to finish cockpit and side decks
MACHINERY

Engines:
2x Suzuki 200hp DF200AP 200hp 2,867cc, 4-cylinder, 16V DOHC, multi-point sequential electronic gasoline injection, 4-stroke petrol Full throttle operating diameter 5,500 – 6,100rpm 12VDC, 44amp alternator Keyless start unit Electronic, single lever control Power cut and tilt
Maintenance & Performance:
Engines last serviced 2022 @144hrs Port engine hours 190hours @ April 2023 Starboard engine hours 189hours @ April 2023 Cruising velocity 22-26kts Max velocity 40kts
Propulsion & Steering:
4 blade stainless steel propeller Hydraulic hand-operated direction
Trim Tabs:
Lenco cut tab unit Self-parking switch
ELECTRICAL SYSTEMS

Voltage units:
12VDC onboard potential unit 230VAC sand potential
Shore Power:
Extension lead to connect to sand supply Single connection socket Flying lead interiorly with 4 sockets
Battery Banks:
Port Engine – 1x 12V, 110Ah, lead acid Starboard Engine - 1x 12V, 110Ah, lead acid Domestic - 1x 12V, 110Ah, lead acid
Solar Panel:
Removable panel, charging house charger only
Battery Monitoring:
Digital voltmeter Battery voltage displayed on engine gauges
General:
Scanstrut USB charging socket at helm 12VDC auxiliary charging socket x2 below deck
PLUMBING

Fresh Water:
Pressurised chilly water only Tap at galley Deck shower by gunwale gate
Bilge Pumps:
Electric bilge pump
TANKAGE

Fuel:
Dual gasoline basins Stainless steel basin development, manufactured in below cockpit sole Approximate chairing 250ltrs each Total basin chairing 500ltrs Tanks plumbed to allow engines to run off either basin or both
Fresh Water:
Single fresh water basin Approximate total chairing 100ltr
Tank Monitoring:
Fuel level displaying on engine gauges or blueprint GPS
NAVIGATION & COMMUNICATION EQUIPMENT

On Deck:
Plotter/Radar – Simard NSS EVO 3 12” MFD with 2kw scanner Depth – Displaying on Simard MFD
Communications Equipment:
DSCVHF – Simrad RS35
DOMESTIC EQUIPMENT

Galley:
Cooker – Wallas Nordic 85Dt, diesel fired hob Stainless steel sink Cold water tap
Heating:
Blown Air – From Wallas hob with fan lid
Lighting:
Overhead beaming in accommodation Reading illumination over forward cot Cockpit deck beam
ACCOMMODATION

Accommodation Finish:
Furniture units crafted of marina plywood, sheathed in GRP laminate and finished in gel-coat Carpet linings to body sides Laminate galley worktop Foam mattresses for cot Foam pads for chairing units Non-slip matting adhered to compartment sole
Layout:
Double cot forward with extension cushion to starboard side extending length to 6’5”+ Mattresses lift to provide access to stowage safe beneath cot L-shaped chairing unit aft of cot to starboard side Opening safe hatch centrally to provide access to sto

Ask for more information

Information from the shipyard catalogue. This data could vary from the data about the boat on sale published by the advertiser,

Basic Technical Data

RIB Carson Interceptor 850

The shipyard RIB has offered us this RIB Carson Interceptor 850 of 9m of length and a for sale price of 137.234€. Boat manufactured in the 2019 and located in Crinan (United Kingdom).

Advert updated on the 22/09/2023
138 visits
Saved as a favourite 0 times